Physiological responses,tolerance, and remediation strategies in plants exposed to metalloids

Environmental Science and Pollution Research - Metalloids are a subset of particular concern to risk assessors and toxicologists because of their well-documented potential hazards to plant system....     

Novel degradation pathway of 4-chloro-2-aminophenol via 4-chlorocatechol in Burkholderia sp. RKJ 800

Burkholderia sp. RKJ 800 utilized 4-chloro-2-aminophenol (4C2AP) as the sole carbon and energy source and degraded it with release of chloride and ammonium ions. The metabolic pathway of degradation of 4C2AP was studied and a novel intermediate, 4-chlorocatechol was identified as a major degradation product of 4C2AP using high-performance liquid chromatography and gas chromatography–mass spectrometry. Enzyme activities for 4C2AP-deaminase and 4-chlorocatechol-1,2-dioxygenase were detected in the crude extracts of the 4C2AP-induced cells of strain RKJ 800. The activity of the 4C2AP-deaminase confirmed the formation of 4-chlorocatechol from 4C2AP and the 4-chlorocatechol-1,2-dioxygenase activity suggested the cleavage of 4-chlorocatechol into 3-chloro-cis,cis-muconate. On the basis of the identified metabolites, we have proposed a novel degradation pathway of 4C2AP for Burkholderia sp. RKJ 800. Furthermore, the potential of Burkholderia sp. RKJ 800 to degrade 4C2AP in soil was also investigated using microcosm studies under laboratory conditions. The results of microcosm studies conclude that Burkholderia sp. RKJ 800 was able to degrade 4C2AP in soil and may be used to remediate 4C2AP-contaminated site. This is the first report of (1) the formation of 4-chlorocatechol and 3-chloro-cis,cis-muconate in the degradation pathway of 4C2AP and (2) bioremediation of 4C2AP by any bacterium.     

In Vivo and In Vitro Degradation Studies for Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyhexanoate) Biopolymer

Studies have shown that the copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB-co-HHx)] possesses favorable mechanical properties for use in medical supplies and products (e.g., sutures, scaffolds, bone plates). One of the major under-addressed issues associated with the use of biodegradable, bio-based PHA polymers in resorbable medical products is the correlation between the mechanical properties and the in vivo material degradation over time. In this study, P(HB-co-17 mol% HHx) matrices were mechanically tested after either incubation in cultures of human embryonic kidney cells (HEK) for in vitro degradation studies for up to 4 weeks, or inserted into Danio rerio (zebrafish) tissues for in vivo degradation studies for up to 7 weeks. The mechanical properties and scanning electron microscopy (SEM) images of the degraded materials were examined and later correlated to understand the degradation phenomenon. Our results show that Young’s modulus of P(HB-co-17 mol%HHx) during in vitro studies decreased from 3.26 to 2.42 GPa within 4 weeks, and in vivo breakdown resulted in a significant decrease in Young’s modulus with a decrease from 3.26 to 0.51 GPa and a mass loss of 59 % within 7 weeks. SEM images showed the development of pores and cracks on the surface of the material over time. Plasticization and recrystallization were observed and likely play a role in the alteration of mechanical properties.     

Validation of an Automated Multiunit Composting System

Biodegradable packaging has high potential to help solve the crisis of non-biodegradable plastic waste causing an increase in the footprint of landfills. However, more research needs to be executed to develop a larger assortment of biodegradable plastics for numerous applications and to make them more economical to manufacture. This paper discusses the design and validation of an automated composting system (AMUCS) that fits the requirements of the American Society for Testing and Materials (ASTM) 5338-11 standard. The results of the experiments show that the AMUCS was able to create and maintain the conditions for biodegradation of biodegradable polymers in compost using microcrystalline cellulose. The biodegradation caused by the composting environment was observed visually with the naked eye and on the micro scale with an environmental scanning electron microscope. The magnitude of biodegradation was measured by calculating the carbon metabolized from the samples. The carbon metabolized from the three compost replicates was consistent and linear, and there was only an 8 % difference between the non-biodegradable low density polyethylene and the compost. For the biodegradation study according to ASTM D 5338-11, the experiment was validated with the use of cellulose as a reference material. Under controlled composting conditions, the mineralization of microcrystalline cellulose yielded 72.05 %, which is slightly higher than the 70 % mineralization requirement.     

Hydrodynamic assessment of sewage impact on water quality of Malad Creek, Mumbai, India

The rapid population growth and uncontrolled development in the coastal zone have led to major pollution impacts on creeks, estuarine, and coastal environment. Water quality models are valuable tools to understand the environmental processes for prediction of pollution impacts and evaluate future trends for management. Presently, the Malad creek in west coast of Mumbai receives wastewater and sewage from open drains and partially treated sewage from Malad and Versova treatment plants. The objective of the paper is to assess the environmental quality and estimate the extent of improvement in different parts of the creek by enhancing the collection efficiency and adequate treatment of sewage as well as disposal through ocean outfall. A hydrodynamic and water quality simulation has been carried out for the present condition in the creek and calibrated and validated with two different season data for better representation of the system. Calibrated model has been used to generate future scenarios based on various options. Among scenarios, option of treated effluent diverted to propose outfall and improvement in collection of unorganized flow through sewerage up to 40% and 60% are found most significant for biochemical oxygen demand reduction and increase in dissolved oxygen. Fecal coliform reduction is also found drastically but still very high against standard. To improve the environmental quality of the creek, still upper stretch requires more dilution and flushing due to narrow width and contribution of heavy pollution from open drains.     

Visibility impairing aerosols in the urban atmosphere of Delhi

To study the visual air quality of Delhi, size fractionated aerosols – coarse and fine fractions of PM₁₀ – were collected and analysed for and EC at three sites with different background activities. The analysed species constitute a smaller portion of coarse fraction (39%) but a larger portion of fine fraction (69%). The sampling was performed from June 2003 to November 2003 which covers monsoon and post monsoon seasons.Aerosol data was used to describe the spatial variation of Visibility Range as a function of chemical composition of visibility impairing aerosols. During the study period, visibility was found to be poor varying between 4.7 and 13 km with an average value of 9.4 km. It is observed that visibility impairment was more due to carbonaceous aerosol followed by sulphate.     

DERIVATION OF SURFACE WATER LAG TIME FOR CONVERGING OVERLAND FLOW1

ABSTRACT: This study presents generalized and special forms of hydraulic solutions of surface water lag time, as conceptualized by Overton (1970), for the converging overland flow. It is shown that these solutions can be used to estimate lag time from physically measurable information on a given watershed.     

Evaluation of adsorption characteristics of an anionic azo dye Brilliant Yellow onto hen feathers in aqueous solutions

Purpose and aim

Removal of an anionic azo dye Brilliant Yellow has been carried out from its aqueous solutions by using hen feathers as potential adsorbent.

Materials and methods

Hen feathers procured from local poultry were cut, washed, and activated. Detailed chemical and physical analysis of hen feathers and its characterization through scanning electron microscopy, X-ray diffraction, and infrared measurements have been made. Procured dye has been adsorbed over under batch measurements and adsorption process is monitored using UV spectrophotometer.

Results

Optimum parameters for the adsorption of Brilliant Yellow over hen feathers have been determined by studying the effect of pH, temperature, concentration of dye, and amount of adsorbent. On the basis of Langmuir adsorption, isotherms feasibility of the ongoing adsorption has been ascertained and thermodynamic parameters have been calculated. Attempts have also been made to verify Freundlich, Tempkin, and Dubinin?CRadushkevich adsorption isotherm models. It is found that during adsorption, uniform distribution of binding energy takes place due to interaction of the dye molecules and the ongoing adsorption process is chemisorptions. The kinetic measurements indicate dominance of pseudo-second-order process during the adsorption. The mathematical treatment on the kinetic data reveals the rate-determining step to be governed through particle diffusion at 8?×?10^?5?M and involvement of film diffusion mechanism at higher concentration at temperatures at all the temperatures.

Conclusions

The developed process is highly efficient and it can be firmly concluded that hen feather exhibits excellent adsorption capacity towards hazardous azo dye Brilliant Yellow.